[Lifetime Warranty] 1/2 in x 1/2 in 13FT Adhesive Foam Tape

1/2 in x 1/2 in 13FT Adhesive Foam Tape

Key Features

• Dimensions: 1/2 in Width x 1/2 in Thickness
• Total Length: 13 feet (may be supplied as two 6.5 ft rolls)
• Material: High-density, closed-cell CR foam and Neoprene blend
• Adhesive: Single-sided, high-strength acrylic adhesive backing
• Properties: Weatherproof, waterproof, sound dampening, and shock-absorbent
• Operating Temperature Range: -40°F to 200°F

Replaces / Cross-Reference Part Numbers

• General purpose sealing and insulation tape for residential, automotive, and industrial use.
• Suitable as a substitute for custom gaskets where 1/2 in x 1/2 in foam is specified.

Compatibility & Fitment

• Universal fit for applications requiring the specified dimensions.
• Commonly used for sealing door frames, window sashes, and jambs.
• Applicable for weather stripping on vehicles, boats, and RVs.
• Can be used to insulate pipes, seal HVAC units, and cushion electronics.
• Easily cut to length for custom installations.

When to Replace

• Existing seals are visibly cracked, brittle, or disintegrating.
• The foam has become permanently compressed and no longer expands.
• Adhesive on the current seal has failed, causing it to peel or detach.
• Noticeable increase in drafts, noise, dust, or moisture infiltration.

Installation Tips

• Thoroughly clean the target surface with isopropyl alcohol to remove any dust, oil, or residue.
• Ensure the surface is completely dry before applying the tape.
• Measure the required length and cut the foam tape with scissors or a utility knife.
• Peel back the liner and apply the tape, pressing down firmly and evenly.
• Do not stretch the tape during application to prevent it from retracting over time.
• Allow 24 hours for the adhesive to fully cure for maximum bond strength.