[Lifetime Warranty] [1/4 Male NPT] 15 inch Stainless Braided RV Propane Pigtail Hose with QCC1 - Propane Tank Connector for BBQ RV Camper Two-Stage Regulator - 2 Pack, Includes Seal Tape

[1/4 Male NPT] 15 inch Stainless Braided RV Propane Pigtail Hose with QCC1 - Propane Tank Connector for BBQ RV Camper Two-Stage Regulator - 2 Pack, Includes Seal Tape

Key Features

• Package Contents: Two 15-inch hoses, one roll of thread seal tape, two protective caps.
• Hose Length: 15 inches
• Tank Connection: QCC1 (ACME Type 1 Nut)
• Regulator Connection: 1/4 inch Male NPT
• Construction: Stainless steel braided exterior over a thermoplastic hose with solid brass end fittings for durability and corrosion resistance.

Replaces / Cross-Reference Part Numbers

• Direct replacement for pigtail hoses with a 1/4 inch Male NPT regulator fitting and QCC1 tank connection.
• Interchangeable with other 15-inch hoses that share identical connection types and specifications.

Compatibility & Fitment

• Connects standard 5 lb to 40 lb propane cylinders to a two-stage RV regulator.
• Designed for regulators with a 1/4 inch Female NPT inlet port.
• NOTE: This hose uses a 1/4 inch Male NPT fitting. It is not compatible with systems requiring a 1/4 inch inverted flare fitting. Verify your regulator's required connection type before purchase.

When to Replace

• Visible damage such as cracks, brittleness, abrasions, or cuts in the hose material.
• Gas leaks detected at any point on the hose or at the fittings (use a soapy water solution to test).
• Corroded, stripped, or otherwise damaged brass fittings that prevent a secure seal.
• Periodic replacement as part of preventative maintenance, typically every 5-7 years.

Installation Tips

• Ensure the propane tank valve is fully closed before beginning installation.
• Apply thread seal tape to the 1/4 inch Male NPT threads before connecting to the regulator.
• Hand-tighten the QCC1 nut onto the propane tank; do not use tools on this connection.
• Use an appropriate wrench to tighten the 1/4 inch NPT fitting into the regulator. To prevent damage, hold the regulator stationary and turn only the metal hose fitting, not the hose itself.
• After installation is complete, open the tank valve and check all connections for leaks with a soapy water solution before use.

Compatibility & Fitment