AZ00162632
Easy
15 - 20 minutes
$11.16
$12.39
Not sure if this is the right part?
Check now
AZ00162632
RV Winterizing Blow Out Adapter, 3/4 GHT Brass Schrader Valve | Schrader Valve to 3/4 Garden Hose, Water Line Blow Out Adapter Fitting with Tire Inflation Valve for Camper Travel Trailer
Easy
15 - 20 minutes
$11.16
$12.39
Save $1.23
In Stock
Fast delivery
Confirm the fit for your model
Find your model number and check it here to see if the part fits.
Description
Description
RV Winterizing Blow Out Adapter, 3/4 GHT Brass Schrader Valve
Key Features
- Connects a standard 3/4-inch GHT garden-hose connection to a Schrader tire-inflation valve for blowing residual water from plumbing lines.
- Made from lead-free brass for corrosion and oxidation resistance.
- Compatible with a household tire inflator, bicycle pump, or air compressor hose with a 1/4-inch quick-connect fitting.
- Includes sealing washers, PTFE thread seal tape, and valve-core dust caps for threaded connections and valve protection.
- Package includes one male 3/4-inch GHT adapter and one female 3/4-inch GHT adapter.
- Covered by the stated lifetime protection for product defects or issues.
Replaces
This kit serves as a 3/4-inch GHT winterizing blow-out connection for clearing water lines with compressed air. No replacement part number is specified.
Cross-Reference Part Numbers
No cross-reference or OEM part numbers are provided. The item model is RV Blow Out Winterizing Adapter.
Compatibility & Fitment
Fits standard 3/4-inch GHT connections used on RVs, travel trailers, campers, motorhomes, boats, watercraft, cabins, outdoor faucets, spigots, sillcocks, garden hoses, soaker hoses, underground sprinkler irrigation systems, and underground drip irrigation systems. Verify that the connection uses standard 3/4-inch GHT threading before ordering.
The Schrader valve ends match standard car tire valves. The adapter can connect to a tire inflator, bicycle pump, or 1/4-inch quick-connect air compressor hose.
When to Replace
Replace the adapter if the brass body is cracked, the threads are damaged, the valve no longer holds or accepts air, or a sealing washer can no longer prevent leaks. Use it before freezing weather to remove residual water from RV and outdoor plumbing lines. Clearing the lines helps reduce the risk of freeze damage and cracked fittings without using liquid antifreeze.
Installation Tips
- Turn off the water supply and the RV water pump.
- Open the water heater pressure relief valve.
- Confirm the water inlet has standard 3/4-inch GHT threads, then install the appropriate male or female adapter with a rubber sealing washer. Apply the included PTFE thread seal tape where needed.
- Connect the air compressor or bicycle pump to the Schrader valve end.
- Open all faucets and drain valves so air can expel water from the lines.
- Remove the air source after the lines have been cleared and install the included valve-core dust caps.
- No special tools are required; the setup can be completed in minutes.
Package contents: one male 3/4-inch GHT winterizing blow-out adapter, one female 3/4-inch GHT winterizing blow-out adapter, one PTFE thread seal tape roll, two rubber sealing washers, and two valve-core dust caps.
Model
RV Blow Out Winterizing Adapter
