AZ00189995
Easy
More than 30 minutes
$16.38
$18.19
Not sure if this is the right part?
Check now
AZ00189995
A051001520 Recoil Starter Pull Start for Husqvarna 350BF 350BT
Easy
More than 30 minutes
Out of Stock
Confirm the fit for your model
Find your model number and check it here to see if the part fits.
Description
Description
A051001520 Recoil Starter Pull Start for Husqvarna 350BF 350BT
Key Features
- Recoil starter assembly for hand-cranking the blower engine during starting.
- Mounting-hole center distance: 67.5 mm.
- ABS plastic handle and housing resist wear, impact, and deformation.
- Nylon 66 starter rope provides smooth retraction, oil resistance, and reduced operating noise.
- Precision metal plate pawl supports reliable engagement and disengagement during starting.
- Package includes 1 recoil starter, 1 hand pull plate, 4 screws, 1 rope, and 1 handle.
Replaces / Cross-Reference Part Numbers
- Echo: A051001520, 6820675010
- Husqvarna: 502843101
- RedMax: 148775100, 148775101, 502843101, T403075100
- Shindaiwa: 6820675010, A051001520
Compatibility & Fitment
- Echo EB630, EB630 (EPA), EB630RT, and EB630RT (EPA) backpack blowers.
- Husqvarna 150 BF, 150 BT, 350 BF, and 350 BT backpack blowers.
- RedMax AG431, BC430WE, BC441DWM, BC442DWM, BC530WE, EB4300, EB431, EB4400, EB441, EB6200, EB7000, EB7001, EB7001RH, EBZ5000, EBZ5000Q, EBZ5000RH, EBZ5100, EBZ5100Q, EBZ5100RH, EBZ5150, and EBZ5150RH backpack blowers.
- Shindaiwa EB630, EB630 (EPA), EB630RT, and EB630RT (EPA) backpack blowers.
- Not compatible with RedMax EBZ7150 or Echo PB-250LN blowers. Confirm the 67.5 mm mounting-hole center distance, dimensions, and part number before ordering.
When to Replace
Replace the recoil starter when the rope is dirty, cracked, frayed, or no longer retracts correctly. Replacement is also appropriate when the spring has sprung or slid out, the engine will not crank for ignition, the handle is difficult to pull, or the starter produces unusual noises.
Installation Tips
- Switch off the blower and allow the engine to cool before beginning service.
- Remove the existing starter and compare its mounting-hole spacing, dimensions, and part number with this assembly.
- Install the replacement starter squarely, fit the supplied screws, and tighten them evenly.
- Confirm that the rope retracts smoothly and that the pawl engages correctly before operating the blower.
