[Lifetime Warranty] 791230 Carburetor Kit - Compatible with B&S 445677 405777 406777 407777 20-25 HP 4 Cycle V-Twin Engine, J-Deere LA120 LA130 LA135 LA140 LA150 LA145 - Replaces 799230 699709 499804 MIA10632

791230 Carburetor Kit

Key Features

• Optimized Fuel Calibration:Precision-jetted for V-Twin engines, ensuring a consistent air-fuel mixture for smooth idling and full-throttle performance under load.
• Pre-Installed Fuel Solenoid:Includes the 12V anti-backfire solenoid to prevent fuel from entering the engine after shut-off, reducing "popping" and carbon buildup.
• Corrosion-Resistant Alloy:Manufactured from high-grade aluminum alloy to resist fuel degradation and ethanol-related corrosion common in modern pump gas.
• Complete Service Kit:Comes with the necessary mounting gaskets and fuel filter to ensure a leak-free installation and a clean fuel supply.

Replaces / Cross-Reference Part Numbers

• Briggs & Stratton:791230, 799230, 699709, 499804, 497586.
• John Deere:MIA10632, LG791230.
• Stens:520-960.

Compatibility & Fitment

• Briggs & Stratton Engines:405777, 406777, 407777, 441777, 445677, 445577, 445777, 445877.
• John Deere Riding Mowers:LA120, LA130, LA135, LA140, LA145, LA150, L120, L130.
• Other Brands:Fits select Craftsman, Husqvarna, and Poulan Pro tractors equipped with B&S 20HP to 25HP V-Twin engines.

When to Replace

• Engine Won't Start:The engine turns over but fails to fire, often due to clogged internal jets or a failed fuel solenoid.
• Surging/Hunting:The engine RPM fluctuates at idle or full throttle, indicating a lean condition or restricted fuel flow.
• Leaking Fuel:Gasoline is dripping from the carburetor throat or the air filter housing, suggesting a stuck float or worn needle valve.
• Backfiring:Occurs when the engine is shut off, typically signaling a faulty anti-backfire solenoid.
• Black Smoke:Excessive fuel is entering the combustion chamber, indicating a "rich" condition or a heavy, non-buoyant float.

Installation Tips

• Safety First:Work in a well-ventilated area. Disconnect the spark plug wires and the battery's negative terminal before starting.
• Drain the Fuel:Pinch off the fuel line or drain the gas tank to prevent spilling during the swap. Always replace the fuel filter included in the kit.
• Gasket Sealing:Ensure the mounting surfaces are perfectly clean. Scrape away old gasket material to prevent vacuum leaks that cause surging.
• Solenoid Connection:Verify the 12V lead to the anti-backfire solenoid is clean and tight; a loose connection will prevent fuel from reaching the engine.
• Fresh Fuel:Always use fresh, stabilized fuel (87 octane or higher) and consider using an ethanol treatment to extend the life of the new carburetor.