[Lifetime Warranty] AEM73213001 Washer Drain Hose - Compatible with LG Washing Machines - Replaces 2134394 5251FA1699P AH3617213 EA3617213 PS3617213

AEM73213001 Washer Drain Hose Assembly

Key Features

• Corrugated Flexible Design:Specifically engineered to prevent kinking and collapsing, ensuring unrestricted water flow during the high-speed drain cycle.
• Molded U-Bend Hook:Features a pre-formed rigid end to securely hook into standpipes or laundry tubs without the need for additional zip ties or clamps.
• Heavy-Duty Polymer Construction:Manufactured from chemical-resistant plastic designed to withstand hot water temperatures and concentrated laundry detergents.
• Precision Fit Connector:Includes a reinforced rubber boot on the machine-end for a leak-proof seal against the drain pump outlet.

Replaces / Cross-Reference Part Numbers

• AEM73213001
• 5251FA1699P
• 2134394
• AH3617213
• EA3617213
• PS3617213
• EAP3617213

Compatibility & Fitment

• LG Front-Loaders:WM2016CW, WM2140CW, WM2240CW, WM2501HWA, WM3001HWA, WM3470HWA.
• LG Top-Loaders:WT4801CW, WT5001CW, WT5101HV.
• Kenmore / Sears:Fits various 796-series washers (e.g., 796.40272800, 796.41172210) manufactured by LG.

When to Replace

• Visible Leaks:Water is pooling behind the machine, or there are visible cracks and pinholes in the corrugated sections of the hose.
• "OE" Error Code:The machine displays an "OE" (Output Error) code, indicating the washer cannot drain. This is often caused by a kinked or internally collapsed hose.
• Odors:Persistent mold or mildew smells coming from the back of the machine, indicating bacterial buildup inside the hose ribs that cannot be flushed.
• Brittle Plastic:The hose feels stiff or "crunchy" to the touch, suggesting it is at risk of bursting under pressure.

Installation Tips

• Safety First:Unplug the washer and shut off the water supply. Be prepared for roughly 1–2 gallons of water to remain in the old hose.
• Accessing the Connection:On most LG models, the hose connects to the drain pump at the bottom rear of the machine. You will need pliers to release the spring clamp.
• Clamp Positioning:When installing the new hose, ensure the spring clamp is seated precisely over the rubber boot and the pump's plastic nipple.
• Standpipe Height:Ensure the U-bend hook is at least 34 inches (86 cm) above the floor but no higher than 96 inches (244 cm) to prevent siphoning issues.
• Air Gap:Do not tape or seal the drain hose directly into the standpipe; an air gap is required to prevent used wash water from being pulled back into the machine.