[Lifetime Warranty] 2-Stage Auto Changeover Dual Propane Regulator

RV Propane 2-Stage Auto Changeover LP Propane Gas Regulator-2 Tank, with Two 18Inch RV Pigtail Stainless Braided Hoses & Gauge

Key Features

• Two-stage regulator design provides a consistent gas pressure.
• Automatic changeover function switches from an empty to a full tank.
• Integrated pressure gauge indicates the service cylinder's gas level.
• Includes two 18-inch stainless steel braided pigtail hoses.
• CSA Certified for safety and quality standards.
• Package contains: 1 regulator, 2 hoses, 1 roll of sealing tape, 1 wrench, and 5 screws.

Replaces / Cross-Reference Part Numbers

• Serves as a direct replacement for most horizontal two-stage automatic changeover regulators with 1/4-inch inverted flare inlets and 3/8-inch NPT female outlets used in dual tank RV applications.

Compatibility & Fitment

• Designed for RVs, travel trailers, campers, and vans equipped with a dual propane tank system.
• Pigtail Hoses: 18-inch length with QCC1 (Type 1) tank connectors and 1/4-inch inverted male flare regulator connectors.
• Regulator Outlet: 3/8-inch NPT female.

When to Replace

• Inconsistent or low flame in appliances.
• Audible gas leaks or persistent smell of propane around the regulator.
• Regulator fails to switch tanks automatically.
• Visible damage, corrosion, or cracks on the regulator body or fittings.
• Pressure gauge is broken or provides inaccurate readings.

Installation Tips

• Ensure both propane tank valves are fully closed before beginning installation.
• Mount the regulator with the vent facing downwards to prevent moisture accumulation.
• Apply the included sealing tape only to the 3/8-inch NPT outlet pipe threads; do not use on flare fittings.
• After installation, open tank valves slowly and check all connections for leaks using a soapy water solution.
• Tighten connections to be snug, but avoid overtightening which can damage the fittings.