[Lifetime Warranty] 2000W Immersion Water Heater - 304 Stainless Steel Anti-scalding Bucket Electric Heater

2000W Immersion Water Heater - 304 Stainless Steel Anti-scalding Bucket Electric Heater

Key Features

• Power Output: 2000W for rapid water heating
• Heating Element: 304 stainless steel construction for corrosion resistance
• Safety Guard: Perforated stainless steel shroud prevents direct contact with the heating element
• Power Cord: Heavy-duty copper wire with a three-prong grounded plug
• Operation: Heats 5 gallons of water in approximately 10-15 minutes
• Control System: Includes an automatic shut-off mechanism and a power indicator light
• Included Accessory: Digital LCD thermometer for monitoring water temperature

Replaces / Cross-Reference Part Numbers

• Serves as a general-purpose replacement for 110V/120V immersion heaters with similar wattage and physical dimensions.

Compatibility & Fitment

• Voltage: 110-120 Volts AC, 60Hz
• Plug Type: Standard North American three-prong grounded plug
• Applications: Suitable for use in buckets, pails, bathtubs, inflatable pools, and stock tanks
• Recommended Volume: Optimized for heating 5-gallon containers; suitable for larger volumes with increased heating time
• Liquid Compatibility: For use with fresh water only

When to Replace

• Your existing heater fails to power on or heat water
• Visible signs of corrosion, pitting, or rust on the heating element or guard
• The power cord is frayed, cracked, or shows signs of heat damage
• The unit repeatedly trips circuit breakers during operation
• Reduced heating efficiency or significantly longer heating times

Installation Tips

• Always completely submerge the heating element and guard in water before plugging the unit into an electrical outlet.
• Ensure the water level remains above the minimum fill line indicated on the heater throughout operation.
• Do not touch the water or the heater element while the unit is plugged in.
• Unplug the heater from the outlet before removing it from the water.
• Allow the heater to cool on a non-flammable, heat-resistant surface after removal.
• Connect only to a properly grounded GFCI (Ground-Fault Circuit Interrupter) protected outlet.