[Lifetime Warranty] 12 Feet Universal QCC1 Low Pressure Propane Regulator with 12 FT Hose, 3/8" Female Flare Nut

12 Feet Universal QCC1 Low Pressure Propane Regulator Grill Replacement, 12 FT Hose for Weber Charbroil Nexgrill LP Gas Grill Heater and Fire Pit Table, 3/8" Female Flare Nut

Key Features

• Hose Length: 12 feet (144 inches)
• Inlet Connection: QCC1 (Type 1) for standard propane tanks
• Outlet Connection: 3/8-inch female flare nut
• Pressure Type: Low pressure
• Max Flow Capacity: 80,000 BTU per hour
• Material: Rubber hose with solid brass fittings
• Provides a secure, airtight connection between the tank and appliance

Replaces / Cross-Reference Part Numbers

• Universal replacement for most low-pressure regulators with a QCC1 inlet and a 3/8-inch male flare outlet connection.
• Suitable for OEM and aftermarket applications on brands such as Weber, Charbroil, Nexgrill, and others.

Compatibility & Fitment

• Fits most low-pressure LP gas appliances requiring a 3/8-inch male flare connection.
• Compatible appliances include gas grills, outdoor heaters, fire pit tables, LP generators, lanterns, and multi-burner camp stoves.
• Tank Connection: Fits standard propane cylinders with a QCC1/Type 1 valve.

When to Replace

• Visible damage to the hose, including cracks, abrasions, brittleness, or holes.
• Gas odor or audible hissing when the tank valve is open, indicating a leak.
• Corrosion or damage to the brass fittings or regulator housing.
• Inconsistent flame, low heat output, or a yellow flame from the appliance.
• Failure to pass a soapy water leak test at connection points.

Installation Tips

• Ensure the propane tank valve is fully closed before starting.
• Hand-tighten the QCC1 fitting onto the propane tank for a secure seal. Do not use tools on this connection.
• Use a wrench to connect the 3/8-inch female flare nut to the appliance's inlet fitting. Tighten until snug.
• After connecting both ends, slowly open the tank valve and check all connections for leaks using a soapy water solution. Bubbles indicate a leak that must be corrected before use.
• Position the hose to avoid direct contact with high-temperature surfaces and to prevent kinking or physical damage.