AZ00246165
Normal
More than 30 minutes
$24.57
$27.29
Not sure if this is the right part?
Check now
AZ00246165
1/2" Gas Pressure Regulator, Adjustable Natural Gas and Liquefied Interchange Pressure Regulator with 2 Brass 1/2" NPT Conversion Adapters for NG/LPG Applications Grill, Heater, Oven, Stove
Normal
More than 30 minutes
Out of Stock
Confirm the fit for your model
Find your model number and check it here to see if the part fits.
Description
Description
1/2" Gas Pressure Regulator, Adjustable Natural Gas and Liquefied Interchange Pressure Regulator with 2 Brass 1/2" NPT Conversion Adapters
Key Features
- Dual-fuel compatibility for both natural gas and liquefied petroleum gas systems.
- Adjustable outlet pressure settings to ensure stable flow for various appliances.
- Durable metal body construction designed for long-term gas line pressure management.
- Includes two 1/2" NPT brass conversion adapters for secure, leak-resistant pipe connections.
- Standard 1/2-inch pipe thread sizing for compatibility with residential gas supply lines.
Replaces / Cross-Reference Part Numbers
- Compatible with universal 1/2" NPT gas regulation systems.
- Replaces standard adjustable regulators used in residential outdoor grills, patio heaters, and indoor stoves.
- Check original equipment manufacturer (OEM) manual for specific flow capacity requirements.
Compatibility & Fitment
- Compatible with Natural Gas (NG) and Liquefied Petroleum Gas (LPG/Propane).
- Suitable for gas appliances including grills, fire pits, heaters, ovens, and stoves.
- Fits standard 1/2" NPT (National Pipe Taper) plumbing connections.
When to Replace
- Replace if the regulator fails to maintain consistent flame height or pressure.
- If there are signs of physical corrosion, cracks in the housing, or external gas leaks.
- If the appliance exhibits irregular performance, such as flickering flames or improper ignition.
- If the internal diaphragm has degraded or fails to respond to adjustment.
Installation Tips
- Ensure the gas supply is completely shut off before starting the installation.
- Observe the directional arrow on the regulator body to confirm proper gas flow orientation.
- Use high-quality gas-rated pipe sealant or thread tape on all NPT connections.
- Perform a leak test using a soapy water solution on all joints after installation and before firing appliances.
- Install the regulator in a position protected from direct environmental exposure when used outdoors.
