AZ00281201
Easy
15 - 20 minutes
$16.38
$18.19
Not sure if this is the right part?
Check now
AZ00281201
WE03X37319 Clothes Dryer Tumbler Front Glide Bearing Kit for Whirlpool Maytag Dryers Replacement - Replace 306508VP AP4037304 PS1804752 312941 (4-Pack)
Easy
15 - 20 minutes
$16.38
$18.19
Save $1.81
In Stock
Fast delivery
Confirm the fit for your model
Find your model number and check it here to see if the part fits.
Description
Description
WE03X37319 Dryer Tumbler Front Glide Bearing Kit
Key Features
- Complete four-piece front drum glide bearing kit.
- Approximate dimensions: 2.86–2.87 inches long by 0.62–0.63 inches wide.
- Made from high-density polymer, white plastic, Teflon, and nylon materials.
- Supports the dryer drum while allowing it to move smoothly against the front felt seal.
- Designed to address loud metal friction or squeaking, rough drum rotation, excessive vibration, shaking, and clothing scratches or marks.
- No batteries are included or required.
- Product coverage is provided for defects or other qualifying issues for the life of the product.
Replaces
This kit replaces the following dryer front glide bearing part references: 306508VP, AP4037304, PS1804752, and 312941.
Cross-Reference Part Numbers
- WE03X37319
- AP7217725
- DE7319
- EAP17137207
- FIX17137207
- PS17137207
- WE01M0404
- WE03M0051
- WE03X37319-25PK
- WE1M404
- WE3M51
- 4985169
Compatibility & Fitment
Fits many dryers from GE, Hotpoint, Kenmore, Sears, and RCA. Supported model examples include GE and Hotpoint models 2661532413, DSKP333EC0WH, DSKS333EC0WW, DSKS433EB0WH, GFD40ESCM0WW, GFD43ESSM0WW, GFD45ESSM0WW, GFDN110ED0WW, GFDS140ED0WW, and HTDX100ED3WW. Verify the existing glide shape, dimensions, and part number before ordering because fitment varies by dryer model.
When to Replace
Replace the front glide bearings when the dryer produces metal-on-metal friction or squeaking, the drum rotates unevenly or does not turn smoothly, the cabinet vibrates excessively, or clothing develops scratches and marks. Worn or damaged glides can reduce support at the front of the drum and increase contact with the front seal.
Installation Tips
- Disconnect the dryer from the electrical supply before servicing.
- Remove the worn glide from its fixture.
- Slide the replacement hook head into the fixture and bend the hook head until it snaps into position.
- Install all four glides as required by the dryer’s front bearing arrangement, then confirm that the drum turns freely before reassembly.
- The repair is suitable for a person with appliance repair experience; a local appliance repair shop can also complete the installation.
Part Number
WE03X37319 PO4
Batteries Included?
No
Batteries Required?
No
