AZ00393318
Normal
More than 30 minutes
$58.50
$64.99
Not sure if this is the right part?
Check now
AZ00393318
KW23MH-I Kerosene Heater Wick - Fits Sengoku HeatMate MegaHeat
Normal
More than 30 minutes
$58.50
$64.99
Save $6.49
In Stock
Fast delivery
Confirm the fit for your model
Find your model number and check it here to see if the part fits.
Description
Description
KW23MH-I Kerosene Heater Wick - Fits Sengoku HeatMate MegaHeat
Key Features
- Replacement kerosene heater wick with a cotton and fiberglass construction.
- Measures 7.87 x 7.59 inches (200 x 192 mm) when laid flat.
- The wick lifts fuel from the tank by capillary action to support an even, controlled flame.
- Fine cross-weaving supports consistent fuel flow, lighting, and combustion while helping reduce carbon buildup at the tip.
- The fiberglass upper edge does not require trimming, while the absorbent cotton base draws kerosene from the tank.
- Package includes one wick.
Replaces / Cross-Reference Part Numbers
- KW23MH-I
- KW23MH0I
Compatibility & Fitment
- Fits Sengoku HeatMate HMC-23K kerosene heaters.
- Fits Sengoku HeatMate 2230 Series kerosene heaters.
- Fits Sengoku MegaHeat 2230 Series kerosene heaters.
- Fits Sengoku 23K kerosene heaters.
- Before ordering, compare the old wick's height and width with this wick. The wick thickness must match the adjuster sleeve, and the height alignment marks must allow the wick to seat at the same depth.
When to Replace
- Replace the wick when the flame burns unevenly or has visible dead spots.
- Increased smoke or odor can indicate a worn or carbonized wick.
- A carbonized burning tip or inconsistent fuel draw is another indication that replacement is needed.
Installation Tips
- A standard screwdriver is needed to remove the protective outer cabinet of the portable heater.
- Lift the old wick from the wick holder and adjuster assembly.
- Fold and insert the replacement wick into the adjuster sleeve.
- Align the height marks and slide the assembly back onto the heater.
- Soak the new wick in kerosene for 24 hours before the first lighting.
- Confirm that the release lever drops the wick freely before operation.
Loading...











