[Lifetime Warranty] 2 Stage Propane Regulator with POL - Standard P.O.L Connection and 3/8in Female Flare Fitting - Propane Tank Regulator for RV Vans Trailers Campers 100lb Tank ASME Tank Generators

2 Stage Propane Regulator with POL - Standard P.O.L Connection and 3/8in Female Flare Fitting

Key Features

• Regulation Type: Two-stage design provides consistent 11" W.C. outlet pressure.
• Flow Capacity: Rated for up to 160,000 BTU/hr.
• Inlet Connection: Standard P.O.L. (CGA 510) fitting.
• Outlet Connection: 3/8-inch female inverted flare fitting.
• Materials: Aluminum and brass construction for corrosion resistance.
• Safety Feature: Includes a downward-facing vent to prevent moisture accumulation.

Replaces / Cross-Reference Part Numbers

• Direct replacement for horizontal two-stage regulators with matching P.O.L. inlet and 3/8-inch flare outlet specifications.
• Comparable to models such as Camco 59333.

Compatibility & Fitment

• Propane Tanks: Fits standard 20, 30, 40, and 100 lb portable propane (LP) cylinders and permanently mounted ASME tanks with P.O.L. valves.
• Applications: Designed for Recreational Vehicles (RVs), travel trailers, campers, and generators.
• Gas Lines: Connects to a 3/8-inch male inverted flare gas hose or fitting.

When to Replace

• Physical Damage: Visible signs of corrosion, cracks, or dents on the regulator body.
• Inconsistent Performance: Appliance flames are yellow, sputtering, or irregular in height.
• Leaks Detected: Smell of propane or positive result from a soapy water leak test at any connection or seam.
• Age: Proactive replacement is recommended every 10-15 years, per industry best practices.

Installation Tips

• Ensure the propane cylinder valve is closed before beginning installation.
• The P.O.L. inlet fitting is designed to be hand-tightened onto the tank valve.
• Use appropriate wrenches to secure the 3/8-inch flare outlet fitting to the gas line.
• Do not use pipe thread sealant or tape on flare fittings; the mechanical seal is sufficient.
• After installation, slowly open the tank valve and perform a leak test on all connections using a non-corrosive leak detection solution.
• Mount the regulator horizontally with the vent pointing downward to protect it from rain and debris.