54510-VG4-C01 Clutch Cable - Compatible with Honda Walk-Behind Lawn Mowers HRR216K2 HRR216K3 HRR216K4 HRT216K1 HRT215K2 HRZ216

54510-VG4-C01 Clutch Cable

Key Features

• Controls the engagement of the transmission drive system.
• Constructed to match original equipment specifications for tension and durability.
• Total cable length: 58 inches.
• Conduit length: 53 inches.
• Designed for consistent pull and responsive mower operation.

Replaces / Cross-Reference Part Numbers

• Honda: 54510-VG4-C01
• Stens: 290-982

Compatibility & Fitment

• Honda HRR216K2
• Honda HRR216K3
• Honda HRR216K4
• Honda HRT216K1
• Honda HRT215K2
• Honda HRZ216

When to Replace

• The self-propelled drive system fails to engage or disengage when the handle is depressed.
• The cable shows signs of fraying, corrosion, or snapping.
• The inner wire is stretched beyond the adjustment capacity of the cable tensioner.
• Excessive resistance is felt when operating the drive control lever.

Installation Tips

• Disconnect the spark plug wire before beginning installation to prevent accidental engine startup.
• Note the routing of the existing cable before removal to ensure the new cable follows the same path, avoiding contact with hot engine components or moving parts.
• After installation, test the drive engagement with the engine off to ensure the cable is properly seated and moving freely.
• Adjust the cable tension at the handle or transmission attachment point according to the specific service manual for your model to ensure proper traction.