[Lifetime Warranty] 1-Inch Handlebar Hand Grips, Non-Slip and Durable - Compatible with Harley Dyna, Sportster 883 1200, Road Glide, Softail, Street Glide, Tour Glide

1-Inch Handlebar Hand Grips for Harley-Davidson

Key Features

• Precision Fit:Designed specifically for 1-inch (25mm) diameter handlebars.
• Durable Construction:Manufactured from heavy-duty aluminum alloy and non-slip synthetic rubber to withstand weather exposure and vibration.
• Enhanced Traction:Features a textured surface pattern for a secure grip and improved control during operation.
• Vibration Dampening:Internal rubber lining helps reduce hand fatigue by absorbing engine and road vibrations.
• Dual Cable Design:Compatible with traditional throttle cable systems (push/pull).

Replaces / Cross-Reference Part Numbers

• 56100054
• 56100047
• 56100101
• 56100224
• Replacement for various aftermarket 1-inch diameter grip sets.

Compatibility & Fitment

• Harley-Davidson Dyna:1993–2017 (except models with electronic throttle).
• Harley-Davidson Sportster 883/1200:1996–2023 XL models.
• Harley-Davidson Softail:1996–2015 (Standard, Fat Boy, Heritage).
• Harley-Davidson Touring:1996–2007 (Road Glide, Street Glide, Road King, Electra Glide).
• Harley-Davidson Street:500/750 models.
• Note:Not compatible with models equipped with Throttle-by-Wire (TBW) or integrated handlebar heaters.

When to Replace

• Material Degradation:If the rubber becomes sticky, cracked, or hardened due to UV exposure.
• Loss of Traction:When the textured grip pattern wears smooth, compromising rider safety.
• Throttle Binding:If the throttle-side sleeve is cracked or causes the throttle to stick rather than snap back.
• Excessive Vibration:When internal dampening components fail, leading to increased hand numbness.

Installation Tips

• Clean Surface:Ensure the handlebar ends are free of old adhesive, grease, and debris before installation.
• Cable Alignment:Properly seat the throttle and idle cables into the sleeve housing to prevent binding.
• Lubrication:Use a small amount of grip adhesive or a fast-evaporating lubricant (like isopropyl alcohol) to slide the non-throttle grip onto the bar.
• Safety Check:Verify that the throttle moves freely and snaps back to the closed position in all handlebar rotations before riding.