[Lifetime Warranty] 44" Water Heater Magnesium Anode Rod Replacement Kit

44” Water Heater Magnesium Anode Rod with 3/4" NPT Thread

Key Features

• Material: Magnesium
• Length: 44 inches
• Connection: 3/4 inch NPT male threads
• Design: Flexible, segmented construction for installation in low-clearance areas
• Function: Provides sacrificial protection to extend the life of the water heater tank by preventing corrosion
• Benefit: Helps reduce "rotten egg" (sulfur) odors caused by bacteria in the water

Replaces / Cross-Reference Part Numbers

• Serves as a direct replacement for standard 44-inch magnesium anode rods with a 3/4 inch NPT connection.

Compatibility & Fitment

• Fits most standard residential gas and electric water heaters from major brands.
• Direct replacement for many Rheem, Ruud, and Richmond water heater models.
• Example model compatibility: PROE50 T2 RH95

When to Replace

• As part of routine maintenance every 2-3 years, depending on water hardness and quality.
• When the existing rod is more than 50% consumed or the steel core wire is exposed.
• If you notice a strong sulfur or "rotten egg" smell from your hot water.

Installation Tips

• Always turn off the power (or gas) and cold water supply to the heater before beginning.
• Relieve pressure in the tank by opening a hot water faucet, then drain several gallons from the tank's drain valve.
• A 1-1/16 inch socket is typically required to remove the old anode rod.
• Apply thread sealant tape to the new rod's threads to ensure a watertight seal.