1.5" to 1.5" T-Joint Pool Hose Connector with 3 Rubber O-Rings - 3-Way Filter Pump Hose Adapter for Above Ground Swimming Pool - Replacement for Intex Hayward Coleman Sand Filter Systems

1.5" to 1.5" T-Joint Pool Hose Connector with 3 Rubber O-Rings - 3-Way Filter Pump Hose Adapter for Above Ground Swimming Pool - Replacement for Intex Hayward Coleman Sand Filter Systems

Key Features

• Connects three 1.5-inch diameter pool hoses in a T-configuration.
• Durable, corrosion-resistant polymer construction for longevity.
• Includes three rubber o-rings to create a secure, watertight seal at each connection point.
• Allows for splitting or combining water flow within a pool's filtration or heating system.
• Smooth interior surfaces minimize flow restriction.

Replaces / Cross-Reference Part Numbers

• Serves as a universal 3-way T-adapter for systems using 1.5-inch hoses.
• Can be used in place of custom plumbing configurations requiring a T-split for 1.5-inch connections.

Compatibility & Fitment

• Hose Size: Fits standard 1.5" (38mm) inner diameter swimming pool filter hoses.
• Pool Type: Designed for above ground swimming pools.
• Compatible Systems: Works with filter pumps, sand filters, cartridge filters, and saltwater systems from brands including Intex, Hayward, and Coleman that utilize 1.5-inch hose connections.

When to Replace

• Visible cracks, fractures, or signs of material fatigue on the existing connector.
• Persistent leaks at hose connection points that cannot be resolved by tightening clamps.
• Degradation from chemical or UV exposure, causing the material to become brittle.
• During system upgrades or re-plumbing of pool equipment.

Installation Tips

• Ensure the pool pump is turned off and unplugged before installation.
• Place one rubber o-ring on each of the three connector outlets before attaching hoses.
• Slide 1.5-inch hoses completely over the connector outlets.
• Secure each hose with a correctly sized hose clamp (sold separately).
• Tighten clamps until snug. Do not overtighten to avoid damaging the connector or hoses.
• After installation, power on the pump and inspect all connections for leaks.