AZ00932776
Normal
Skill level: four tiers from easy to expert, based on user feedback
15 - 20 minutes

$33.93

$37.69

puzzle

Not sure if this is the right part?

Check now

[Grip120] 88843 Bush Hog Drive Belt for ATH 720, FTH 720, 72" RDTH 72, TD-1700, 55" HDZ3155FX4, HDZ3355ECV4, HDZ3855ECV4 Mower Drive Belt | 155.5" x 5/8" image 0
AZ00932776

[Grip120] 88843 Bush Hog Drive Belt for ATH 720, FTH 720, 72" RDTH 72, TD-1700, 55" HDZ3155FX4, HDZ3355ECV4, HDZ3855ECV4 Mower Drive Belt | 155.5" x 5/8"

Normal
Skill level: four tiers from easy to expert, based on user feedback
15 - 20 minutes

$33.93

$37.69

Save $3.76
In Stock

Fast delivery

puzzle

Confirm the fit for your model

Find your model number and check it here to see if the part fits.


Description

88843 Bush Hog Drive Belt (155.5" x 5/8")

Key Features

  • Type: Heavy-duty mower drive belt
  • Dimensions: 155.5 inches in length by 5/8 inches in width
  • Construction: High-strength cord reinforcement for reduced stretching
  • Outer covering: Oil and heat-resistant compound for extended service life
  • Application: Designed for consistent power transmission in commercial mowing decks

Replaces / Cross-Reference Part Numbers

  • Bush Hog: 88843

Compatibility & Fitment

  • Bush Hog ATH 720
  • Bush Hog FTH 720
  • Bush Hog RDTH 72
  • Bush Hog TD-1700
  • Bush Hog HDZ3155FX4
  • Bush Hog HDZ3355ECV4
  • Bush Hog HDZ3855ECV4

When to Replace

  • Visible surface cracks, fraying, or splitting along the belt edges
  • Loss of tension resulting in slippage during heavy cutting loads
  • Evidence of glazing (shiny or slick appearance) on the inner v-groove surfaces
  • Excessive stretching that prevents the tensioner from maintaining proper pressure
  • Deep gouges or missing segments caused by debris interference

Installation Tips

  • Disconnect the spark plug wire before beginning installation to prevent accidental engine start.
  • Ensure the mower deck is fully lowered or removed according to the owner's manual for better access.
  • Loosen the belt tensioning hardware fully before attempting to remove the old belt.
  • Clean all pulleys of dirt, grass, and oil residue before installing the new belt to ensure proper seating.
  • Verify that the belt is correctly routed through all guides and pulleys before applying final tension.
  • Run the mower at low throttle for several minutes after installation to seat the belt into the pulley grooves.
Belt Style
Grip120

Color
As Pictured

Compatible Devices
Lawn Mower

Material
Aramid

Material Type
Aramid

Part Number
88843 Green

Unit Count
1.0 Count


Loading...